FiberScanONE confirms the great success of the free 3d models predecessor FiberScan MKII, world's first microwave consistency meter, who led the way to change forever the technology of the consistency meters, setting what is now a standard in the paper industry.
FiberScanONE accurately measures the consistency and dewatering in the forming section of pulp and paper machines. The instrument is a key for process optimization and cost savings.
Efficient production at lower cost can be achieved ensuring that it is not used more vacuum than the correct required for proper dewatering in the forming section.
Sheet dryness leaving the forming section also has a great impact on energy consumption: 1% higher dryness in the forming section translates in 6% improvement in the dryer section.
FiberScanONE allows an easy and fast way to monitor and trouble shoot forming section efficiency and chemicals performances.
The high speed FFT sampling function, allows a fast troubleshooting of the periodical paper grammage pulsations and cross direction barring.
FiberScanONE microwave technology, accurate & safe to use, freedom to travel. FiberScanONE, is the world's first microwave consistency meter. Microwave technology doesn't require any permission to use, transport or store the instrument, unlike instruments using gamma scattering technologies. This results in financial savings for the user of FiberScanONE.
FiberScanONE measures purely the stock mass, therefore the effect of the forming fabric is minimal, and precisely measured by the instrument.
Additionally, free 3d models the accuracy of the instrument further improves exactly where needed, close to the couch roll. In this way extremely accurate values of consistency can be obtained, when compared to other technologies.
Performance matter Unlike other instruments, FiberScanONE multi-patented microwave technology, allows the unique consistency measurements of water thickness up to 50mm (50.000gsm), with no limitations on machines producing brown grades or pulp where the slice opening is often higher than 50mm. This unique feature makes FiberScanONE™ the only real substitute to the gamma scattering technology, and free 3d models a dramatic improvement in data reliability and measurements possibilities.
With a sampling speed of 1024 sps, FiberScanONE the fastest consistency meter on the market, for the best accuracy when performing FFT grammage pulsation analysis.
FiberScanONE is also the fastest consistency meter to use. The new OLED display indicates on board the whole mass profiles, and CMD scans, with possibility to edit them.
This feature avoids to the operator the necessity to download data to a PC for better data elaboration.
The new HostXL database supplied in bundle allows to plot a sophisticate drainage survey showing not only consistency trends, but also mass, vacuum, retention, dewatering related to the forming section machine sketch.
HostXL allows the comparison of various analysis, with the maximum freedom assembling the graphs. A sophisticate FFT analysis and CMD profiles are also included.
The data can be transferred wirelessly via BlueTooth or USB from the instrument to any PC.
Ergonomy matter. Designing FiberScanONE, we had 4 targets: accuracy, safety, maximum ergonomy, light weight.
The result is the lightest (3,5kg) and more accurate consistency meter available on the market, with the best balance, easy to handle in all the situations, telescopic to reach the most difficult positions found on the forming section. These features reduce the stress to the service engineer.
Reliable innovation, for better papermaking.
FiberScanONE accurately measures the consistency and dewatering in the forming section of pulp and paper machines. The instrument is a key for process optimization and cost savings.
Efficient production at lower cost can be achieved ensuring that it is not used more vacuum than the correct required for proper dewatering in the forming section.
Sheet dryness leaving the forming section also has a great impact on energy consumption: 1% higher dryness in the forming section translates in 6% improvement in the dryer section.
FiberScanONE allows an easy and fast way to monitor and trouble shoot forming section efficiency and chemicals performances.
The high speed FFT sampling function, allows a fast troubleshooting of the periodical paper grammage pulsations and cross direction barring.
FiberScanONE microwave technology, accurate & safe to use, freedom to travel. FiberScanONE, is the world's first microwave consistency meter. Microwave technology doesn't require any permission to use, transport or store the instrument, unlike instruments using gamma scattering technologies. This results in financial savings for the user of FiberScanONE.
FiberScanONE measures purely the stock mass, therefore the effect of the forming fabric is minimal, and precisely measured by the instrument.
Additionally, free 3d models the accuracy of the instrument further improves exactly where needed, close to the couch roll. In this way extremely accurate values of consistency can be obtained, when compared to other technologies.
Performance matter Unlike other instruments, FiberScanONE multi-patented microwave technology, allows the unique consistency measurements of water thickness up to 50mm (50.000gsm), with no limitations on machines producing brown grades or pulp where the slice opening is often higher than 50mm. This unique feature makes FiberScanONE™ the only real substitute to the gamma scattering technology, and free 3d models a dramatic improvement in data reliability and measurements possibilities.
With a sampling speed of 1024 sps, FiberScanONE the fastest consistency meter on the market, for the best accuracy when performing FFT grammage pulsation analysis.
FiberScanONE is also the fastest consistency meter to use. The new OLED display indicates on board the whole mass profiles, and CMD scans, with possibility to edit them.
This feature avoids to the operator the necessity to download data to a PC for better data elaboration.
The new HostXL database supplied in bundle allows to plot a sophisticate drainage survey showing not only consistency trends, but also mass, vacuum, retention, dewatering related to the forming section machine sketch.
HostXL allows the comparison of various analysis, with the maximum freedom assembling the graphs. A sophisticate FFT analysis and CMD profiles are also included.
The data can be transferred wirelessly via BlueTooth or USB from the instrument to any PC.
Ergonomy matter. Designing FiberScanONE, we had 4 targets: accuracy, safety, maximum ergonomy, light weight.
The result is the lightest (3,5kg) and more accurate consistency meter available on the market, with the best balance, easy to handle in all the situations, telescopic to reach the most difficult positions found on the forming section. These features reduce the stress to the service engineer.
Reliable innovation, for better papermaking.
0 komentar:
Post a Comment